online catalog of spare parts for heavy equipments

Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91))

CRAWLER EXCAVATORS Case 170C
/case/170C/m83/s-236.html / 04 ELECTRICAL SYSTEMS / TURNTABLE ELECTRICAL HARNESS

Select section

Subsection

Unit

Part diagram TURNTABLE ELECTRICAL HARNESS - CRAWLER EXCAVATORS Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91)) | 777parts.com
# Part No. Description Qty
1 REF INSTRUCTION; BATTERY - 12 volt, see Figure 4-40 for battery mounting 2
2 P1***55 CABLE; - battery to electrical box 1
3 REF INSTRUCTION; BOX - electrical, see Figures 4-44 through 4-52 for electrical box and related parts, see page 4-67 for turntable harness connections 1
4 P8***41 HARNESS; - electrical box to solenoid control valves 1
5 P1***71 SHIN; VALVE ASSEMBLY - solenoid control, parts list Figure 8-132 3
6 P3***33 BLOCK ASSY.; VALVE ASSEMBLY - solenoid control, parts list Figure 8-134 1
7 REF INSTRUCTION; LAMP - turntable, right-hand, see page 4-41 for mounting 1
8 P8***64 CABLE; HARNESS - electrical box to right-hand turntable lamp 1
9 P4***77 GROMMET; - rubber, harness 1
10 P9***97 HARNESS; - horn, electrical attachment socket and left-hand turntable lamp 1
11 REF INSTRUCTION; HORN - warning, see Figure 4-40 for mounting 1
12 REF INSTRUCTION; SOCKET - electrical attachment, see Figure 4-40 for mounting 1
13 REF INSTRUCTION; LAMP - turntable, left-hand, see Figure 4-41 for mounting 1
14 P8***40 HARNESS; - work lamps 1
15 REF INSTRUCTION; LAMP - work, see Figure 4-40 for mounting 2
16 P8***39 CABLE; HARNESS - ground 1
17 P1***03 SCREW; BOLT - hex, 6 mm x 22 mm, ground harness mounting 1
18 P3***99 WASHER; SPACER - 4 mm thick, ground harness mounting bolt 2
19 82***06 NUT,M6, Cl 8; Ground harness mounting bolt M6, Cl 8 1
20 REF INSTRUCTION; SENDER - electrical, travel speed, see Figure 8-51 for related hydraulic components 1
21 P9***28 CABLE; HARNESS - electrical, Serial Range: box-senders 1
22 P9***27 ELECTRICAL WIRE; WIRE - connector, electrical senders 2
23 P8***85 CLAMP; - harness, 27 mm - 31 mm range
24 J9***27 BOLT,Hex, M8 x 1.25 x 22mm, Cl 10.9; - hex flange, 8 mm x 22 mm, special, harness clamp
25 P3***94 WASHER; SPACER - 6 mm thick, clamp bolt
26 P3***13 NUT; - hex, 8 mm, clamp bolt
27 P1***31 GLAND; BUSHING - harness locking, 10 mm (0.39 inch) diameter 1
28 P1***39 NUT; - bushing, used with 10 mm (0.39 inch) diameter bushing 1

TURNTABLE ELECTRICAL HARNESS - CRAWLER EXCAVATORS Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91)) | 777parts.com