online catalog of spare parts for heavy equipments

Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91))

CRAWLER EXCAVATORS Case 170C
/case/170C/m83/s-236.html / 08 HYDRAULICS / HYDRAULIC RESERVOIR

Select section

Subsection

Unit

Part diagram HYDRAULIC RESERVOIR - CRAWLER EXCAVATORS Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91)) | 777parts.com
# Part No. Description Qty
1 P1***24 OIL RESERVOIR; RESERVOIR - hydraulic oil 1
2 P1***44 PLUG; - reservoir drain 1
3 23***23 O-RING,0.103" Thk x 1.174" ID, -123, Cl 6, 90 Duro; Drain plug (Replaces O-ring R30990) -123, 90 Duro, 1.174" ID x .103" Thk 1
4 P1***09 BODY; GAUGE - sight, oil level 1
5 P4***55 SIGHTGLASS; GLASS - sight gauge 1
6 P3***37 O-RING; - sight gauge 1
7 61***20 BOLT,Hex, M10 x 1.5 x 20mm, Cl 8.8, Full Thd; Gauge to tank (Replaces bolt P33826) Hex, M10 x 20, 8.8, Full Thd 4
8 P2***24 COMPOSITE SEAL; WASHER - flat, gauge bolt 4
P1***10 PLUG; BREATHER ASSEMBLY - hydraulic tank, Includes: Ref. 9-12 1
9 NSS NOT SOLD SEPARAT; COVER - breather, order breather assembly P1337410 1
10 P8***66 CARTRIDGE; FILTER - tank breather 1
11 NSS NOT SOLD SEPARAT; BASE - breather, order breather assembly P1337410 1
12 P9***79 SEAL; -, Serial Range: breather-tank 1
13 P2***41 O-RING,0.103" Thk x 0.362" ID, -110, Cl 5, 75 Duro; - breather mounting stud 2
14 83***08 NUT,M8 x 1.25, Cl 8.8; NUT, (Replaces nut P134596) M8 x 1.25, Cl 8 2
15 REF INSTRUCTION; FILTER ASSEMBLY - hydraulic return oil, see Figure 8-166 for filter identification and parts list 3
16 P3***02 WASHER; - lock, filter to tank studs 18
17 P3***13 NUT; - hex, filter to tank studs 18
18 P8***28 ELECTRO/HYD CONTACT; SENDER - filter condition 3
19 P2***24 COMPOSITE SEAL; SEAL - sending unit 3
20 81***30 BOLT,Hex, M14 x 2 x 130mm, Cl 8.8; tank mounting (Replaces bolt P433837) Hex, M14 x 130, 8.8 4
21 P3***92 WASHER; SPACER - tank mounting bolt 4
22 P1***49 SAFETY NUT; NUT - hex, tank mounting bolt 4

HYDRAULIC RESERVOIR - CRAWLER EXCAVATORS Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91)) | 777parts.com