online catalog of spare parts for heavy equipments

Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91))

CRAWLER EXCAVATORS Case 170C
/case/170C/m83/s-236.html / 08 HYDRAULICS / HYDRAULIC CIRCUIT RETURN LINES, TO OIL COOLER AND FAN MOTOR

Select section

Subsection

Unit

Part diagram HYDRAULIC CIRCUIT RETURN LINES, TO OIL COOLER AND FAN MOTOR - CRAWLER EXCAVATORS Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91)) | 777parts.com
# Part No. Description Qty
1 P3***09 MANIFOLD; TUBE - return, at regulating valve 1
2 P3***78 ELBOW-CONNECTION; ELBOW - 90 degree, at return tube 1
3 P3***57 HOSE; - return to cooler, 500 mm (19-11/16 inch) long 1
4 P3***54 UNION; ADAPTER - straight 1
5 P8***03 PIPE; TUBE - return, to check valve 1
6 P7***38 SHIN; CLAMP - tube 2
7 61***35 BOLT,Hex, M10 x 1.5 x 35mm, Cl 8.8, Full Thd; - hex, full threads, 10 - 1.5 x 35 mm 4
8 P3***06 UNION; ADAPTER ASSEMBLY - straight, at check valve, Includes: O-ring P945294 1
P9***94 SEAL; O-RING - adapter 1
9 REF INSTRUCTION; HOSE - to pilot circuit, see page 8-39 for continuation of circuit 1
10 P2***10 BLOCK ASSY.; VALVE ASSEMBLY - check, parts list Figure 8-154 1
11 P3***07 FITTING; ADAPTER ASSEMBLY - check valve to tee, Includes: O-ring P945294 1
P9***94 SEAL; O-RING - adapter 1
12 P1***93 O-RING; -, Serial Range: flange-filter 1
13 P1***22 TEE; - return, Serial Range: tubes-cooler 1
14 REF INSTRUCTION; TUBE - to pilot circuit, see page 8-39 for continuation of circuit 1
15 P1***21 TEE; - to pilot circuit 1
16 P2***07 BLANK-OFF PLUG; CAP - tee 1
17 P6***03 PIPE; TUBE - to pilot circuit tee 1
18 P6***01 PIPE; TUBE - return, to cooler fan motor and regulator valve 1
19 P8***57 SHIN; CLAMP - tube, to tapped block 1
20 P2***74 SCREW; BOLT - hex, 12 mm x 50 mm 2
21 P1***03 SUPPORT; CLAMP - inner, double tube 2
22 P1***04 SHIN; CLAMP - outer, double tube 2
23 81***45 BOLT,Hex, M12 x 1.75 x 45mm, Cl 8.8; - hex, 12 mm - 1.75 x 45 mm, plated 2
24 P3***33 TEE; - at pressure regulating valve 1
25 P3***21 UNION; ADAPTER ASSEMBLY - straight, Includes: O-ring P945294 1
P9***94 SEAL; O-RING - adapter 1
26 REF INSTRUCTION; HOSE - return to reservoir, 400 mm (15-3/4 inch) long, cut from bulk hose P1103610 below 1
27 P3***01 HOSE; - to cooler fan motor, 630 mm (24-13/16 inch) long 1
28 P3***59 SHIN; ADAPTER - hose to cooler fan motor 1
29 P3***60 SHIN; ADAPTER - hose to cooler fan motor 1
30 23***21 O-RING,0.103" Thk x 1.049" ID, -121, Cl 6, 90 Duro; Adapter to motor (Replaces O-ring D54277) -121, 90 Duro, 1.049" ID x .103" Thk 2
31 P7***58 SCREW; BOLT - hex socket, 6 mm x 20 mm, class 10.9 8
32 P3***97 HOSE; - cooler fan motor to tee, 630 mm (24-13/16 inch) long 1
33 P5***03 TEE; - return tube 1
34 P6***37 PIPE; TUBE - return, to regulator valve 1
35 14***31 HEX SOC SCREW,M10 x 1.5 x 35mm, Cl 10.9, Full Thd 4
36 P3***79 BLOCK ASSY.; VALVE ASSEMBLY - pressure regulating, 13 bar, parts list Figure 8-152 1
P1***10 PIPE; HOSE - bulk, sold by the meter Continued on next figure

HYDRAULIC CIRCUIT RETURN LINES, TO OIL COOLER AND FAN MOTOR - CRAWLER EXCAVATORS Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91)) | 777parts.com