online catalog of spare parts for heavy equipments

Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91))

CRAWLER EXCAVATORS Case 170C
/case/170C/m83/s-236.html / 08 HYDRAULICS / ARM CYLINDER CIRCUIT, TUBES AT CYLINDER, UNITS WITHOUT CRANING VALVE

Select section

Subsection

Unit

Part diagram ARM CYLINDER CIRCUIT, TUBES AT CYLINDER, UNITS WITHOUT CRANING VALVE - CRAWLER EXCAVATORS Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91)) | 777parts.com
# Part No. Description Qty
1 REF INSTRUCTION; CYLINDER ASSEMBLY - arm, parts list Figure 8-172 or 8-174 1
2 P3***05 SHIN; BLOCK - rod end 1
3 P5***41 VALVE POPPET; VALVE - restrictor 1
4 P3***77 STOP; - restrictor valve 1
5 P2***83 O-RING,0.139" Thk x 2.109" ID, -227, Cl 5, 75 Duro; - block (Replaces O-ring P330402) 1
6 86***00 HEX SOC SCREW,M16 x 100mm, Cl 8.8; (Replaces bolt P32959) Hex Soc Hd, M16 x 100, 8.8 4
7 J5***18 SCREW,Hex Skt, M12 x 40mm, Cl 10.9 2
8 P8***73 PIPE; TUBE - arm cylinder, rod end 1
9 P8***90 END FITTING; ADAPTER - grease fitting, if used 1
10 J4***01 LUBE NIPPLE,M8 x 1.25; rod end of arm cylinder, if used M8 x 1.25 1
11 P1***17 SUPPORT; BRACKET - clamp mounting 1
12 P5***17 SHIN; CLAMP - tube 2
13 P1***84 SCREW; BOLT - hex, 12 mm x 110 mm 2
14 P4***97 WASHER; SPACER - clamp, 8 mm thick 4
15 82***12 NUT,M12, Cl 10.9; - hex, 12 mm - 1.75, class 10 2
16 P3***95 SHIN; BLOCK - hose mounting, base end 1
17 P2***83 O-RING,0.139" Thk x 2.109" ID, -227, Cl 5, 75 Duro; - block (Replaces O-ring P330402) 1
18 P5***66 SCREW; BOLT - hex socket, 16 mm x 110 mm, class 10.9 4
19 J5***18 SCREW,Hex Skt, M12 x 40mm, Cl 10.9 2
20 P1***29 JUNCTION; ADAPTER - hose, Serial Range: flange-block 1
21 P6***34 SCREW; BOLT - hex socket, 12 mm x 40 mm, class 10.9 2
22 82***12 NUT,M12, Cl 10.9; - hex, 12 mm - 1.75, class 10 2
23 P1***18 SEAL; BUSHING - arm cylinder 4

ARM CYLINDER CIRCUIT, TUBES AT CYLINDER, UNITS WITHOUT CRANING VALVE - CRAWLER EXCAVATORS Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91)) | 777parts.com