online catalog of spare parts for heavy equipments

Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91))

CRAWLER EXCAVATORS Case 170C
/case/170C/m83/s-236.html / 09 CHASSIS / TURNTABLE LOWER ACCESS COVERS

Select section

Subsection

Unit

Part diagram TURNTABLE LOWER ACCESS COVERS - CRAWLER EXCAVATORS Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91)) | 777parts.com
# Part No. Description Qty
P7***13 PANEL; COVER ASSEMBLY - center, Includes: Ref. 1-5 1
1 NSS NOT SOLD SEPARAT; COVER - center, order cover assembly P7543813 1
2 P7***53 STEM; ROD - threaded 2
3 P3***31 SPLIT PIN/SAFETY PIN; PIN - roll, nut 4
4 P8***78 NUT; - hand twist 2
5 REF INSTRUCTION; SEAL - cover, 3500 mm (138 inch) long, cut from bulk seal P3109 below 1
6 P2***05 JOINT; HINGE - cover 2
7 61***35 BOLT,Hex, M12 x 1.75 x 35mm, Cl 8.8, Full Thd; Cover hinge Hex, M12 x 35, 8.8, Full Thd 6
8 P3***93 WASHER; SPACER - hinge bolt, 8 mm thick 6
P7***12 PANEL; COVER ASSEMBLY - center front, Includes: Ref. 9, 10 1
9 NSS NOT SOLD SEPARAT; COVER - center front, order cover assembly P7543812 1
10 REF INSTRUCTION; SEAL - cover, 1200 mm (47-1/4 inch) long, cut from bulk seal P3109 below 1
11 61***40 BOLT,Hex, M14 x 2 x 40mm, Cl 8.8, Full Thd; Center cover (Replaces bolt P533846) Hex, M14 x 40, 8.8, Full Thd 2
12 P3***92 WASHER; SPACER - cover bolt, 10 mm thick 2
13 P5***37 HOOD; COVER - front, right-hand 1
14 61***20 BOLT,Hex, M10 x 1.5 x 20mm, Cl 8.8, Full Thd; Front cover (Replaces bolt P33826) Hex, M10 x 20, 8.8, Full Thd 1
15 P3***95 WASHER; SPACER - cover bolt, 7 mm thick 1
16 P1***52 HOOD; COVER - rear, right-hand 4
17 61***20 BOLT,Hex, M10 x 1.5 x 20mm, Cl 8.8, Full Thd; Rear cover (Replaces bolt P33826) Hex, M10 x 20, 8.8, Full Thd 4
18 P3***95 WASHER; SPACER - cover bolt, 7 mm thick 4
19 P5***38 HOOD; COVER - front, left-hand 5
20 61***20 BOLT,Hex, M10 x 1.5 x 20mm, Cl 8.8, Full Thd; Front covers (Replaces bolt P33826) Hex, M10 x 20, 8.8, Full Thd 10
21 P3***95 WASHER; SPACER - cover bolt, 7 mm thick 10
22 P4***33 HOOD; COVER - rear, left-hand 3
23 61***20 BOLT,Hex, M10 x 1.5 x 20mm, Cl 8.8, Full Thd; Rear cover (Replaces bolt P33826) Hex, M10 x 20, 8.8, Full Thd 6
24 P3***95 WASHER; SPACER - cover bolt, 7 mm thick 6
25 P7***63 STOP; - rubber, cover 18
26 P4***95 WASHER; SPACER - stop, 6 mm thick 18
27 83***08 NUT,M8 x 1.25, Cl 8.8; NUT, (Replaces nut P134596) M8 x 1.25, Cl 8 18
P3***09 GASKET; SEAL - bulk, sold by the meter Continued on next figure

TURNTABLE LOWER ACCESS COVERS - CRAWLER EXCAVATORS Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91)) | 777parts.com