online catalog of spare parts for heavy equipments

Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91))

CRAWLER EXCAVATORS Case 170C
/case/170C/m83/s-236.html / 09 CHASSIS / SEAT MOUNTING AND FLOOR PLATE

Select section

Subsection

Unit

Part diagram SEAT MOUNTING AND FLOOR PLATE - CRAWLER EXCAVATORS Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91)) | 777parts.com
# Part No. Description Qty
1 REF INSTRUCTION; SEAT ASSEMBLY - operator’s, parts list Figure 9-26 1
2 81***60 BOLT,Hex, M12 x 1.75 x 60mm, Cl 8.8; - hex head, 12 mm - 1.75 x 60 mm (8.8), plated, Seat mounting 4
3 P3***93 WASHER; SPACER - bolt, upper, 8 mm 4
4 P4***32 WASHER; SPACER - bolt, lower, 28 mm 4
5 P1***78 NUT; - mounting bolt 4
6 P3***85 MAT; - under seat, no longer available 1
7 P3***48 MAT; - floor, no longer available 1
8 REF INSTRUCTION; VALVE ASSEMBLY - control, foot, parts list Figure 8-128 or 8-130
9 81***50 BOLT,Hex, M8 x 1.25 x 50mm, Cl 8.8; - hex, 8 - 1.25 x 50 mm (8.8), Control valve mounting (Replaces bolt P33822)
10 P3***94 WASHER; SPACER - bolt, upper, 6 mm
11 P4***30 WASHER; SPACER - bolt, lower, 20 mm
12 P1***71 NUT; - valve mounting bolts
13 P7***05 FLOOR; PLATE - floor, operator compartment 1
14 P4***78 GROMMET; GUIDE - in floor plate 2
15 REF INSTRUCTION; SEAL - 0.3 meters (0.98 foot) long, cut from bulk seal P3127 below 2
16 P3***52 LARGE PLATE; PAD - insulation, rear 1
17 P1***32 PUMP; - foot 1
18 61***16 BOLT,Hex, M6 x 1 x 16mm, Cl 8.8, Full Thd; Foot pump mounting Hex, M6 x 16, 8.8 4
19 P3***99 WASHER; SPACER - bolt, 4 mm 4
20 P4***45 SUPPORT - floor plate (Replaces support P3841491) 4
21 81***40 BOLT,Hex, M10 x 1.5 x 40mm, Cl 8.8; - hex, 10 - 1.5 x 40 mm, support mounting (Replaces bolt P933818) 8
22 P3***95 WASHER; SPACER - bolt, 7 mm thick 8
23 83***10 NUT,M10 x 1.5, Cl 8; NUT, LOCK, , Mounting bolt (Replaces nut P34598) M10 x 1.5, Cl 8 8
24 81***60 BOLT,Hex, M12 x 1.75 x 60mm, Cl 8.8; - hex head, 12 mm - 1.75 x 60 mm (8.8), plated, Center mount 4
25 P3***97 WASHER; SPACER - center mount bolt, 30 mm 4
26 81***80 BOLT,Hex, M14 x 2 x 80mm, Cl 8.8; floor plate (Replaces bolt P933851) Hex, M14 x 80, 8.8 2
27 P6***08 BUSHING; SPACER - bolt 2
28 REF INSTRUCTION; SEAL - 4.5 meters (14-3/4 foot) long, cut from bulk seal P3127 below 1
29 REF INSTRUCTION; SEAL - 200 mm (7-7/8 inch) long, cut from bulk seal P3128 below 2
30 P2***45 SIEVE; GRILLE - heater, under seat 1
31 61***25 BOLT,Hex, M8 x 1.25 x 25mm, Cl 8.8, Full Thd; - hex, full threads, 8 - 1.25 x 25 mm, grille mounting (Replaces bolt P33815) 4
32 P3***94 WASHER; SPACER - bolt, 6 mm 4
33 P1***71 NUT; - mounting bolt 4
34 P1***99 NEG BATTERY CABLE; STRAP - ground 1
35 61***35 BOLT,Hex, M10 x 1.5 x 35mm, Cl 8.8, Full Thd; - hex, full threads, 10 - 1.5 x 35 mm, ground strap 2
36 P3***95 WASHER; SPACER - bolt, 7 mm 3
37 82***10 NUT,M10, Cl 8; Ground bolt (Replaces nut P34166) M10, Cl 8 1
38 61***40 BOLT,Hex, M14 x 2 x 40mm, Cl 8.8, Full Thd; Floor plate (Replaces bolt P533846) Hex, M14 x 40, 8.8, Full Thd 2
39 P3***92 WASHER; SPACER - bolt, 10 mm 2
40 P3***60 DOOR; BOX - manual 1
41 P2***35 CHAIN (AG); CHAIN - manual 1
42 P3***18 RIVET; - pop, 4.8 mm x 17 mm, manual box 2
P3***27 SEAL; - bulk, sold by the meter
P3***28 SEAL; - bulk, sold by the meter

SEAT MOUNTING AND FLOOR PLATE - CRAWLER EXCAVATORS Case 170C (CASE CRAWLER EXCAVATOR (1/90-12/91)) | 777parts.com